loading
Ruidong
| Availability: | |
|---|---|
| Quantity: | |
|
Product Description
There are generally nine types of fan coil units: FP34, FP51, FP68, FP85, FP102, FP136, FP170, FP204, and FP238.
The following functions can be added: with lower return air box, rear return air box, filter, electrostatic dust removal, wet film humidification with purification function, DC brushless, extended water tray, etc.;
Number of rows of fan coil units: 2 rows, 4 rows. You can choose according to your needs.
Outlet air pressure: 12Pa, 30Pa, 50Pa.
Structural features of fan coil units: Among the terminal products, it is the only one in which the fan is installed in front of the surface cooler, and the fan outlet blows the surface cooler. The others are all surface coolers installed at the return air outlet of the fan.
Pressure test of the cooler: design pressure is 1.6MPa, air pressure test: 1.2 times of the design pressure;
Test duration is greater than 1min;
Water pressure test: 1.5 times of the design pressure, test duration is greater than 5min.
We perform air pressure test, test pressure is 2MPa, duration is 1min.
Product advantages:
1. We use Φ7*0.3mm copper tubes, which have more complete heat exchange and higher efficiency;
2. Hydrophilic aluminum with a thickness of 0.12mm is used, and there is no water on the surface of the cooler, which is conducive to heat exchange and can also play an anti-corrosion role;
3. Domestic brand motors are used, all of which have passed the national mandatory 3C certification;
4. The outer shell is made of high-quality non-flowering galvanized sheet, with beautiful surface, small weight and corrosion resistance;
5. The unit can achieve ultra-low noise operation;
6. The unit has a long service life and low maintenance cost;
7. The ultra-low design height of 230mm saves installation space and can meet various installation sites.
8. Purification, electrostatic dust removal, photocatalyst sterilization, wet film humidification and other functions can be added according to usage requirements.
|
Product Description
There are generally nine types of fan coil units: FP34, FP51, FP68, FP85, FP102, FP136, FP170, FP204, and FP238.
The following functions can be added: with lower return air box, rear return air box, filter, electrostatic dust removal, wet film humidification with purification function, DC brushless, extended water tray, etc.;
Number of rows of fan coil units: 2 rows, 4 rows. You can choose according to your needs.
Outlet air pressure: 12Pa, 30Pa, 50Pa.
Structural features of fan coil units: Among the terminal products, it is the only one in which the fan is installed in front of the surface cooler, and the fan outlet blows the surface cooler. The others are all surface coolers installed at the return air outlet of the fan.
Pressure test of the cooler: design pressure is 1.6MPa, air pressure test: 1.2 times of the design pressure;
Test duration is greater than 1min;
Water pressure test: 1.5 times of the design pressure, test duration is greater than 5min.
We perform air pressure test, test pressure is 2MPa, duration is 1min.
Product advantages:
1. We use Φ7*0.3mm copper tubes, which have more complete heat exchange and higher efficiency;
2. Hydrophilic aluminum with a thickness of 0.12mm is used, and there is no water on the surface of the cooler, which is conducive to heat exchange and can also play an anti-corrosion role;
3. Domestic brand motors are used, all of which have passed the national mandatory 3C certification;
4. The outer shell is made of high-quality non-flowering galvanized sheet, with beautiful surface, small weight and corrosion resistance;
5. The unit can achieve ultra-low noise operation;
6. The unit has a long service life and low maintenance cost;
7. The ultra-low design height of 230mm saves installation space and can meet various installation sites.
8. Purification, electrostatic dust removal, photocatalyst sterilization, wet film humidification and other functions can be added according to usage requirements.
